Reverse PoE designed EPON ONU

8FE Reverse PoE EPON ONU


8FE Reverse PoE EPON ONU is an EPON broadband access device with reverse PoE designed to fulfill FTTH request of telecom operators, internet access of SOHO people and renovation request of EPON+EOC infrastructure of Broadcast & cable TV companies. It features easy installation and maintenance, broad temperature range, low power consumption, mute design, high stability, environment-friendly, and energy conservation.

8FE Reverse PoE EPON ONU is powered by the power sourcing equipment (PSE) deployed in where there is no alternating current (AC) power supply.

 It has two type case optional, metal case or outdoor waterproof plastic case.


  • Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
  • Integrated OAM remote configuration and maintenance function.
  • Support rich QinQ VLAN function and IGMP Snooping multicast feature.
  • Functions like transceiver diagnostic monitoring, transmitter disable, etc.
  • Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
  • Easily configuration by local CLI.


ModelV2808PD-M (metal case)
V2808PD-WP (water proof plastic case)
WavelengthTx 1310nm, Rx 1490n
Port8*10/100Mbps auto adaptive Ethernet interfaces, Full
Duplex/Half Duplex, RJ45 connectors
Rx sensitivity<-27dBm(PX20+)
Functionl   Shared 1M bit on-chip memory-based switch fabric with true non-blocking switching performance.
l   8K MAC address entries with automatic learning and aging.
l   Per port programmable MAC address limiting.
l   802.1Q VLAN support for the full 4,096 VLAN IDs.
l   Quality of Service support with four traffic classes.
l   Support Strict, Weighted, or mixed mode QoS.
l   Integrated 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
l   Support port monitoring, port mirroring, port rate limiting, port SLA, etc.
l   Support auto polarity detection of Ethernet ports (AUTO MDIX).
l   Support layer 2 Policy Control
l   Support IPv4 IGMP snooping and IPv6 MLD snooping.
Surge protection1000V(metal case), 4000V(water proof case)
Indicators12 indicators, for status of power supply, PON port and 8 Ethernet ports
Power supplyPowered by the power sourcing equipment (PSE)
Power consumption<5W
Dimension (L*W*H)205*125*28mm
Net Weight0.4KG
Operation Temp.10 ℃ ~+45 ℃ (metal case), -30 ℃ ~+60 ℃ (water proof case)
Storage Temp.-30 ~ +60 ℃
Humidity10~90% (non-condensing)