EDFA-1550S Standard Erbium Doped Fiber Amplifier

FOT EDFA-1550S product view

Ask for quote!

Standard Erbium Doped Fiber Amplifier

  FOT EDFA-1550S is 1550nm Erbium Doped Fiber Amplifier (standard) adopts 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDS-U, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source.
In the interior of the machine is equipped with the output optical power stability circuit and laser thermoelectric cooling device, temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the laser’s working state, the VFD screen displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles

Features

  • High quality: The former-class pump commonly uses 980nm, after-class pump use 1480nm, power is legitimately optimized by software to minimize the NF of the EDFA, could be comparable with the so-called low-power optical amplifier. It can make the system to obtain superior CNR.
  • Reliability: 19 “1U standard rack, built-in high-performance switching power supply, it can work at 85~265Vac City Network Voltage, As well as an optional DC48V power supply (reservations required); Chassis cooling automatic temperature control. Mechanical cooler (heat sink) on one side of the chassis helps to make heat dispersion thus to protect the pump laser.
  • Intuitive: Equipped with microprocessor monitors the working state of the laser, and the panel LCD window displays the operating parameters.
  • Network type: Select all piece status monitoring transponder guarantee to meet the national standard and be compatible with the SCTE HMS standard, it enable network management monitoring capabilities.

Technical Specification

ItemsSpecification
Operating wavelength range1540~1560nm
Optical input power-10~+10 dBm
Nominal optical input power3dBm
Working pump quantity1~3
Saturated output power13~27dBm
Number of output ports1~8 (customer specify)
Noise Figure (NF)<5.0dB (+0 dBm input @1550nm)
Optical output power stability<±0.5 dB
Polarization Sensitivity<0.2 dB
Polarization dependence gain<0.5 dB
Polarization mode dispersion<0.5ps
Optical connector (IN/OUT)SC/APC or FC/APC or customer specify
SNMP management interfaceRJ45 (optional)
Power supply115~265VAC or -48 VDC
Power consumption50W
Working temperature-5~6 °C
Storage temperature-40~8 °C
Operating relative humidity5~95 %
Size19”×14.5”×1.75” (1U,19’’)

Product series

Model1550nm Standard Erbium Doped Fiber Amplifier
Output power @ +3dBm input
EDFA-1550S-13Saturated output power≥13dBm (20mW)
EDFA-1550S-14Saturated output power≥14dBm(25mW)
EDFA-1550S-15Saturated output power≥15dBm(32mW)
EDFA-1550S-16Saturated output power≥16dBm(40mW)
EDFA-1550S-17Saturated output power≥17dBm(50mW)
EDFA-1550S-18Saturated output power≥18dBm(63mW)
EDFA-1550S-19Saturated output power≥19dBm(80mW)
EDFA-1550S-20Saturated output power≥20dBm(100mW)
EDFA-1550S-21Saturated output power≥21dBm(125mW)
EDFA-1550S-22Saturated output power≥22dBm(160mW)
EDFA-1550S-23Saturated output power≥23dBm(200mW)
EDFA-1550S-24Saturated output power≥24dBm(250mW)
EDFA-1550S-25Saturated output power≥25dBm(320mW)
EDFA-1550S-26Saturated output power≥26dBm(400mW)
EDFA-1550S-27Saturated output power≥27dBm(500mW)

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com Skype: fanny-lee2007Tel: +86-20-2209 8370
Add.:97th Science Avenue, Science Town,  Guangzhou, Guangdong, China
ContactUs.com