Equipments required in a basic FTTx network

  In actual small & medium FTTx projects, it could be a test bed, in a lab environment or a demo PON case in an apartment building. We called it a basic FTTx network project, which is usally low cost and simple service providing etc. There may be two scenarios of providing FTTx service to an apartment building: FTTH and FTTB.

  • If a fiber is run to a panel inside each subscribers apartment unit (eg: Home or SoHo), it is FTTH.
  • If instead the fiber goes only as far as the apartment building’s shared electrical room (either only to the first floor or to each floor), it is FTTB.
Basic FTTx Application(With IMS/Softswitching/IP MAN description)

Basic FTTx Application

  The “basic” meaning in this blog post here, means a basic function of FTTH/FTTB broadband access solution, like data, or internet service, IPTV etc. Then, based on a basic FTTH/FTTB requirement, FOT blog is sharing what is the basic fiber equipment package for our pure data service FTTx projects. 

2/4/8PON ports EPON OLT

  FOT OLT-100xD is 19” 1U rack, 2/4/8PON ports EPON optical line terminal (OLT), which is suitable for Small & Medium FTTx projects. Fiber Optic Telecom’s EPON OLT bases on mature Ethernet Passive Optic Network technology and complies with IEEE.802.3ah EPON standard. It is used to connect and manage EPON ONU/HGU and provides high-speed data, voice and video service to the users in fiber to the home network (FTTH).

FOT PON OLT-100xD

FOT PON OLT-100xD

Features

  • 19inch, 1U rack, 2/4/8 EPON ports
  • All uplink port can work at the same time
  • Support Layer 3 Route/Switch
  • Max split ratio 1:64
  • ONU auto-detection and registration
  • Support LGMP and Snooping function
  • OLT-1008D support 4*10GE SFP+ uplink and dual power supply.
  • Support data encryption, multi-cast, port VLAN, separation, RSTP, etc

1GE EPON ONU

FOT PON ONU-100GZ

FOT PON ONU-100GZ

  FOT ONU-100GZ is 1 GE EPON optical network unit (ONU) , which is suitable for providing Gigabit bandwidth to FTTH subscribers and EPON+EoC network. Fiber Optic Telecom’s EPON ONU bases on mature Ethernet Passive Optic Network technology and complies with IEEE.802.3ah EPON standard. It can work with standard EPON optical line terminal(OLT) and provides high-speed data, voice and video service to the users in fiber to the home network (FTTH).

Features

  • ZTE chipset (ZX279110), Gigabit LAN port, plug and play
  • Small pocket size, low power consumption
  • Support DBA bandwidth
  • Support Dying Gasp
  • Support VLAN, Multicast, Qos
  • Support L3 NAT etc.

4GE EPON ONU

FOT PON ONU-400GC

FOT PON ONU-400GC

  FOT ONU-400GC is 4GE EPON optical network unit (ONU), which is used to provide Fast Ethernet bandwidth to FTTH subscribers and EPON+EoC network. Fiber Optic Telecom’s EPON ONU bases on mature Ethernet Passive Optic Network technology and complies with IEEE.802.3ah EPON standard. It can work with standard EPON optical line terminal(OLT) and provides high-speed data, voice and video service to the users in fiber to the home network (FTTH).

Features

  • Cortina chipset, 4*10/100/1000BASE-T port, plug and play
  • Support ONU auto-discovery, auto-configure, auto-update etc
  • Support VLAN, IEEE802.1QinQ, IEEE802.1p QoS, port rate limited etc
  • Support optical power and transceiver temperature detection etc.

PLC splitter and passive component

PLC splitter and passive component

PLC splitter and passive component

  PLC splitter is a kind of power splitter based on the integrated quartz base plate with small size, wide operating wavelength range, high reliability, and good uniformity so on, especially suitable for passive optical network (EPON, BPON, GPON, etc.) to connect the central office and terminal equipment for achieving the branching of the optical signal. So far there are two types of PLC 1×N and 2×N Splitter. PLC 1×N and 2×N Splitter divide uniformly optical signals from one or two inputs to multiple outputs, and splitter can be operated in reverse direction to combine multiple signals into fiber or two fibers.

Features

  • 1:N, 2:N (N=2, 4, 8, 16, 32, 64) are available.
  • Low IL and PDL
  • Wide wavelength range
  • High reliability
  • High channel counts
  • Excellent Environmental & Mechanical Stability
  • Large operating temperature range

    Ask for Basic FTTx Product Details!

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com