FOT Lesson: Safety topics during PON equipment installation

Electrical Safety and Laser Safety

  The configuration, installation, and operation of Fiber Optic Telecom (FTTH PON) products in a network are highly specialized processes. Due to the different nature of each installation, some safety aspects may not be covered in this sharing blog post.

Safety topics during PON equipment installation

Safety topics during PON equipment installation

CAUTION: Product installation should be performed only by trained service personnel.

  Read and follow all warning notices and instructions marked on the product or included in its packaging, and observe all safety instructions listed in this guide while handling any PON OLT or ONT.

Electrical Safety

  • Always use caution when handling live electrical connections.
  • Do not install electrical equipment in wet or damp conditions.
  • Ensure that the power source for the system is adequately rated to assure safe operation and provides current overload protection.
  • Do not allow anything to rest on the power cable, and do not place this product where people will stand or walk on the power cable.
  • To avoid electric shock of user which caused by over-voltage from PSTN, DO NOT connect the POTS port on this unit directly to external PSTN line.
  • This unit can only be used with the certified adaptor model included inside the package, which complies with the requirement of limited power source.

  WARNING: Do not open the enclosure without manufacturer’s permission and technical support, which is dangerous and voids the warranty.

safty topic on ont installation

safty topic on ont installation

Laser Safety

  CAUTION: Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.
  Invisible laser radiation may be emitted from the ends of un- terminated fiber cables or connectors. Never look directly into an un-terminated cable or connector.
  Some ONTs use a class I laser device.  

WARNING: Personnel handling fiber optic cables must be trained for laser safety.

  CAUTION: Do not bend the fiber optic cable to a diameter smaller than 7.5 cm/3 inches. Doing so may damage the fiber or prevent the signal from passing through properly.

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com