FTTx triple-play service config series posts (Index)

FAQ: How to deploy triple service via FOT GEPON solution

  Fiber to the x (FTTX) is a generic term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications.

Case 1: How to deploy Internet service

  In this case, FTTH solution devices will deliver high bandwidth data internet services via using the optical network. This “internet” configuration allows you to configure WAN connections via different mode: DHCP, PPPoE or Static.

Data Internet application case

Data Internet application case

Details steps as following:

  1. Planning Data
  2. Configuring the OLT
  3. OLT & ONU EMS system config

Case 2: How to deploy VoIP service

  FOT PON solution supports full SIP protocol for VoIP/IP Phone service. This blog post is sharing a example introduces how to configure high quality VoIP service via FTTH PON EMS web management system.

VoIP Internet application case

VoIP Internet application case

Requirement planning data
  PON ONU (HGU) works on route mode. It’s VLAN ID of the PON (WAN) port service is 200, SIP server is 10.1.2.1, more planning data detail please refer to the following table.

Item DescriptionExample
ONUSlot No.The number of the slot actually used.0
InformationPON No.The number of the actually used PON port.1
ONUConfigure according to the network planning of the operator.1
Auth No.
ONUThe type of the ONU.ONU-420GW / HG326UEG
Type
OLTService UplinkThe VLAN ID of the uplink port service.VLAN mode = UNTAG PVID = 200
VLAN
Service Uplink portConfigure according to the number of the actually used uplink port.GE6
Service PON VLANThe VLAN ID of the PON port service.VLAN mode = TAG VLAN ID = 200
Service PON portConfigure according to the number of the actually used PON port.PON1
ONUService WAN VLANThe VLAN ID of the PON(WAN) port service.VLAN ID = 200
Service POTSThe number of the actually used ONU port.POTS1
port
If WANThe router use DHCP assign ip to ONU.Gateway = 10.1.2.1 IP Range
use DHCP mode10.1.2.2-10.1.1.254
IP Mask = 255.255.255.0 DNS = 8.8.8.8
If WANThe router use PPPoE assign ip to ONU.IP Range
use PPPoE10.1.2.2-10.1.2.254
modeIP Mask = 255.255.255.0
User name = test1 Password = test1
If WANThe router use Static assign ip to ONU.Gateway = 10.1.2.1
use Static modeIP = 10.1.2.100
IP Mask = 255.255.255.0 DNS = 8.8.8.8

  1. OLT CLI script
  2. VoIP application Info
  3. OLT Configuration in web EMS system

Case 3: How to deploy IPTV service (Step 1, Planning Data)

  Internet Protocol television (IPTV) is a system through which television services are delivered using the Internet protocol suite over a packet-switched network such as a LAN or the Internet, instead of being delivered through traditional terrestrial, satellite signal, and cable television formats. Unlike downloaded media, IPTV offers the ability to stream the media in smaller batches, directly from the source. As a result, a client media player can begin playing the data (such as a movie) before the entire file has been transmitted. This is known as streaming media.

Deploy the IPTV service via GEPON solution

Deploy the IPTV service via GEPON solution

  Technically speaking, the core data planing of this IPTV service configuration can be divided into four parts:

  • Basic Configuration;
  • Router Configuration;
  • User Vlan Configuration;
  • STB data configuration.

Case 3: How to deploy IPTV service (Step 2, EMS management)

  According a actual data planning via IPTV Study Case “How to deploy IPTV service via GEPON solution: Planning Data” in our FOT blog pre-posted. We know the full detail Planning Data and CLI Data Script content in that blog post.. We also know the core data planing of this IPTV service configuration can be divided into four parts (above):

  After double checking the planning data table and CLI data script successfully running, engineers and technical staff can start to set the OLT and ONU configuration via PON EMS system.
OLT web EMS configuration

port configuration (set uplink pvid)

port configuration (set uplink pvid)

ONU web EMS configuration

  1. Internet setting. Preview of ONU’s WAN port configuration information.
  2. IPTV service LAN VLAN setting.
  3. IPTV service Multicast VLAN setting.

Ask for more PON application guide!

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com