How to deploy Internet service via GEPON solution

  Fiber to the x (FTTX) is a generic term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications.
  In this case, FTTH solution devices will deliver telephony (VoIP) and pay-TV (IPTV) services using the optical network. This “internet” configuration allows you to configure WAN connections via different mode: DHCP, PPPoE or Static.

Data Internet application case

Data Internet application case

Planning Data

Item DescriptionExample
ONUSlot No.The number of the slot actually used.0
InformationPON No.The number of the actually used PON port.1
ONUConfigure according to the network planning of the operator.1
Auth No.
ONUThe type of the ONU.HG326UEG
Type
OLTService Uplink VLANThe VLAN ID of the uplink port service.VLAN mode = UNTAG PVID = 100
ServiceConfigure according to the number ofGE8
Uplink portthe actually used uplink port.
Service PON VLANThe VLAN ID of the PON port service.VLAN mode = TAG VLAN ID = 100
Service PON portConfigure according to the number of the actually used PON port.PON1
ONUService LAN VLANThe VLAN ID of the LAN port service.Default No VLAN
Service LAN portThe number of the actually used ONU port.LAN1
WiFiWireless’s SSID name,Security.SSID1 name = SSID-1
Security method = WAP2 Mixed
WPA Encryption = TKIP WPA2 Encryption = AES KEY = 12345678
Service WAN VLANThe VLAN ID of the PON(WAN) port service.VLAN ID = 100
If WANThe router use DHCP assign ip to terminal user.Gateway = 10.1.1.1 IP Range
use DHCP mode10.1.1.2-10.1.1.254
IP Mask = 255.255.255.0 DNS = 8.8.8.8
If WANThe router use PPPoE assign ip to terminal user.IP Range
use PPPoE10.1.1.2-10.1.1.254
modeIP Mask = 255.255.255.0
User name = test Password = test
If WANThe router use Static assign ip to terminal user.Gateway = 10.1.1.1
use Static modeIP = 10.1.1.100
IP Mask = 255.255.255.0 DNS = 8.8.8.8
PCDHCPThe ONU use DHCP assign ip to PC.Gateway = 192.168.1.1
modeIP = 192.168.1.2
IP Mask = 255.255.255.0 DNS = 192.168.1.1

Configuring the OLT

 CLI

epon-olt(config)# vlan 100 epon-olt(config-vlan-100)# exit

epon-olt(config)# interface gigabitethernet 0/8

epon-olt(config-if-ge0/8)# switchport hybrid vlan 100 untagged epon-olt(config-if-ge0/8)# switchport hybrid pvid vlan 100 epon-olt(config-if-ge0/8)# exit

epon-olt(config)# interface epon 0/1

epon-olt(config-pon-0/1)# switchport hybrid vlan 100 tagged epon-olt(config-pon-0/1)# exit

OLT & ONU EMS system config

1. Right-click the OLT icon and select Configuration->VLAN Configuration

2. Click the Add button, configure according to the planning data.

3. Click the commit button to complete the configuration.

Tips: Detail configuration case please refer the VoIP and IPTV case, check the link at the bottom of post.
4. Right-click the OLT icon and select Configuration->Port Configuration

  Configure according to the planning data.

5. Click the Apply button to complete the configuration.

Ask for more PON application guide!

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com