How to deploy IPTV service via GEPON solution: Planning Data

Actual IPTV Study Case

  Internet Protocol television (IPTV) is a system through which television services are delivered using the Internet protocol suite over a packet-switched network such as a LAN or the Internet, instead of being delivered through traditional terrestrial, satellite signal, and cable television formats. Unlike downloaded media, IPTV offers the ability to stream the media in smaller batches, directly from the source. As a result, a client media player can begin playing the data (such as a movie) before the entire file has been transmitted. This is known as streaming media.

Deploy the IPTV service via GEPON solution

Deploy the IPTV service via GEPON solution

  Technically speaking, the core data planing of this IPTV service configuration can be divided into four parts:

  1. Basic Configuration;
  2. Router Configuration;
  3. User Vlan Configuration;
  4. STB data configuration.

Data Planning

  For better understanding, let’s make a clear table of the configuration data details to show this “Bridge With VLAN–IPTV” study case.

Item DescriptionExample
ONUSlot No.The number of the slot actually used.0
InformationPON No.The number of the actually used PON port.1
ONU Auth No.Configure according to the network planning of the operator.1
ONU TypeThe type of the ONU.ONU-420GW / HG326UEG
OLTServiceThe VLAN ID of the uplink portVLAN mode = UNTAG
Uplink VLANservice.PVID = 300
Service Uplink portConfigure according to the number of the actually used uplink port.GE7
Service PON VLANThe VLAN ID of the PON port service.VLAN mode = TAG VLAN ID = 300
Service PON portConfigure according to the number of the actually used PON port.PON1
ONUService WAN VLANThe VLAN ID of the PON(WAN) port service.VLAN mode= Transparent
Service LAN VLANThe VLAN ID of the LAN port service.VLAN mode = UNTAG LAN VLAN ID = 300
Multicast VLAN ID = 300
Service LAN portThe number of the actually used ONU port.LAN4
STBManagement IPThe IP for STB.Gateway = 10.1.3.1
IP = 10.1.3.100
IP Mask = 255.255.255.0

CLI Data Script

  Here sharing the full CLI (Command Line Interface) data script for the related PON OLT device:

epon-olt(config)# vlan 300 epon-olt(config-vlan-300)# exit

epon-olt(config)# interface gigabitethernet 0/7

epon-olt(config-if-ge0/7)# switchport hybrid vlan 300 untagged epon-olt(config-if-ge0/7)# switchport hybrid pvid vlan 300 epon-olt(config-if-ge0/7)# exit

epon-olt(config)# interface epon 0/1

epon-olt(config-pon-0/1)# switchport hybrid vlan 300 tagged epon-olt(config-pon-0/1)# exit

epon-olt(config)# ip igmp snooping enable

epon-olt(config)# ip igmp snooping general-query-packet enable

epon-olt(config)# ip igmp snooping mrouter vlan 300 interface gigabitethernet 0/7 epon-olt(config)# interface epon 0/1

epon-olt(config-pon-0/1)# ip igmp snooping user-vlan 300 group-vlan 300 tagged epon-olt(config-pon-0/1)# exit

Work unfinished (To be continued)

  What’s next? After double checking the detail planning data table above, the CLI data script, engineers and technical staff can excute those command on the OLT device. Even the command run successfully, but there are some work unfinished, such as the OLT setting and ONU configuration via the EMS system.

(To be continued)

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com