Module PLC splitter

ABS box module PLC splitter


The Fiber Optic PLC Splitter is based on a quartz substrate of integrated waveguide optical power distribution device. The optical network system also needs to be an optical signal coupled to the branch distribution, which requires the fiber optic splitter, Is one of the most important passive devices in the optical fiber link, Module PLC Splitter is optical fiber tandem device with many input terminals and many output terminals, Especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH etc.) to connect the MDF and the terminal equipment and to achieve the branching of the optical signal.


  • 1:N, 2:N (N=2, 4, 8, 16, 32, 64) are available.
  • Low IL and PDL
  • Wide wavelength range
  • High reliability
  • High channel counts
  • Excellent Environmental & Mechanical Stability
  • Large operating temperature range
  • Module PLC Splitter


Operating Wavelength(nm)  1260---1650      
Fiber TypeG652A,G657A or Customer Specified
1*N PLC Splitter1*21*41*81*161*321*64
Insertion loss(dB)MAXdB4.17.110.413.416.620.4
Channel UniformityMAXdB0.60.811.41.61.9
Return lossMINdB55(P) / 50(S)
2*N PLC Splitter2*22*42*82*162*322*64
Insertion loss(dB)MAXdB4.17.310.613.817.320.6
Channel UniformityMAXdB0.811.21.51.82
Return lossMINdB55(P) / 50(S)
Operation Temperature-40 ~ 85
Storage Temperature-40 ~ 85

REMARK: Measured at room temperature and excludes connector loss

Order information

PLC: MD – 1 – B – 1.0 – 08 – B – 1.0 – SC/APC

 ①  ②  ③  ④  ⑤  ⑥  ⑦    ⑧

①typeMN=Mini, MD=module, RM=Rack Mount, CS=Chassis
②Input form1=1 channel ,2=2 Channels
③Input fiber typeB=250um Bare Fiber , 0.9/2.0/3.0L=900um/2mm/3mm Loose Tube
④Input fiber length1.0M,1.5M Or can be customized
⑤Output form04=4Channels,08=Channels,16/32/64
⑥Output fiber typeB=250um Bare Fiber , 0.9/2.0/3.0L=900um/2mm/3mm Loose Tube
⑦ßOutput fiber length1.0M,1.5M Or can be customized
⑧connector typeO=None.SC/FC/ST/LC/MU/SMA (PC/APC)