P421W P2P FTTH Router

P2P fiber router P421W

P2P fiber router P421W

Ask for quote!

Introduction

  FOT P421W (4GE+2FXS+CATV+WiFi) fiber optic network router, also known as P2P FTTH Home Gateway, each wavelength can run at a different speed and protocol so there is an easy pay-as-you-grow upgrade.
  FOT P2P FTTH router solution support standard SNMP-based network management systems to provide robust administration, management, QoS, and security for FTTx networks.

Technical Specifications

  For P2P fiber optic network architecture, it’s advantages is obvious: the MAC layer is simplified, because the P2P connections between Central Office (CO) Optic Fiber Aggregation Switches and home gateway are realized in wavelength domain, so no P2MP media access control is needed.

  For P421W product detail technical specifications, see the following info:

  • Chipset: BCM68380 seriese chipset
  • 4GE+2FXS+CATV+WiFi P2P FTTH Router, exclusive high bandwidth
  • Power adapter input:220V AC,50HZ
  • System power supply: 12V,1.5A; Power Consumption: ≤10W
  • Ambient temperature:-5 ~ +55℃ Ambient humidity:10% ~ 95%(non-condensing)
  • Store temperature:-30 ~ +60℃ Store humidity:10% ~ 95%(non-condensing)
  • Dimension(L x W x H): 247mm×147mm×37mm
  • Weight(without Power Adapter): About 300g

Technical Parameter

  For detail hardware and software technical parameter, see the following table:

Parameter NameHardware Parameter
P2P
ChipsetBCM68380 Series
Optical TypeSC/APC
SC single-mode/single-fiber, symmetric 1.25Gbps
WavelengthTx 1310nm, Rx 1490nm CATV 1550nm
Optical PowerTx Power -9 to -2 dBm
Rx Sensitivity -22 dBm
CATV -8 to +2 dBm
Interface Type4*10/100/1000Mbps
Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector
2 POTS, RJ11 connector
1 SCTE F connector
WirelessCompliant with IEEE802.11b/g/n, 300Mbps, 2T2R 2 internal antennas
Indicators12, For POWER 、 system 、 LINK 、 WiFi 、 Phone 、 LAN 、 Pair 、 CATV
Parameter NameSoftware Parameter
P2P
LANSupport Port rate limiting
Support Loop detection
VLANSupport VLAN tag mode
Support VLAN transparent mode
Support VLAN trunk mode
Support VLAN translation mode
Support VLAN QinQ mode
MulticastSupport IGMPv1/v2/v3
Support IGMP Proxy and MLD Proxy
Support IGMP Snooping and MLD Snooping
QoSSupport 4 queues
Support SP and WRR
Support 802.1P
Support DSCP
L3Support IPv4 、 IPv6 and IPv4/IPv6 dual stack
Support DHCP/PPPOE/Statics
Support Static route
Support NAT
Support Bridge, Route ,Route and Bridge mixed mode
Support DMZ
Support DNS
Support ALG
Support UPnP
Support Virtual Server
DHCPSupport DHCP Server
VOIPSupport SIP protocol
Support Voice coding: ITU-T G.711/G.723/G.726/G.729, auto-negotiate with call agent
Support Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length
Support high/low speed fax/Modem, bypass fax, and T38 fax
Support InBand / RFC2833/SIP INFO, MD5 authentication, call forward, call waiting, hot-line call, and all kinds of value-added voice service. Multi-party conferencing
Support Line testing according to GR-909
WirelessSupport 802.11b/g/n and Mixed mode
Support 4 SSID
Support No-auth 、 WEP 、 WPA-PSK and WPA2-PSK function with AES 、 TKIP encryption
CATVRF Video Output Bandwidth (MHz):45~875
RF Output Level(dBuv):80
AGC Dynamic Range(dBm):-6~+2
PerformanceData loss: <1*10E-12
Call loss: <0.01%
SecuritySupport Firewall
Support Mac filter
Support ACL
Support URL filter
ManagementSupport WEB
Support TR069
Support TELNET
Support CLI

P2P FTTH Application

FTTH P2P(point to point) Fiber Solution

FTTH P2P(point to point) Fiber Solution

Latest Blog

About Us

Why FTTH can save telecom cost

FTTH: saving money

【Our Goal】

Benefits our customers via Fiber Network (FTTH).

【FOT Telecom】

Your reliable fiber network equipment and service provider: Read More

Contact us

Email: sales@fiberoptictel.com fiberoptictelecom@gmail.com SKYPE: fanny-lee2007 SKYPE: fiberoptictelecom Tel: +86-20-22098370
Add.: Jitang Industrial Zone, No.8 Nanyun Five road, Huangpu, Guangzhou. 510663
ContactUs.com